Search Harmonised Standards in ASEAN: HS

Connecting devices for low-voltage circuits for household and similar purposes - Part 1: General requirements / IEC 60998-1:2002 Edition 2.0

This part of IEC 60998 applies to connecting devices as separate entities for the connection of two or more electrical copper conductors (complying with IEC…  [More Details+]

Connecting devices for low-voltage circuits for household and similar purposes - Part 1: General requirements / IEC 60998-1 Ed.2.0 (2002)

This part of IEC 60998 applies to connecting devices as separate entities for the connection of two or more electrical copper conductors (complying with IEC…  [More Details+]

Connecting devices for low-voltage circuits for household and similar purposes - Part 2-1: Particular requirements for connecting devices as separate entities with screw-type clamping units / IEC 60998-2-1:2002 Edition 2.0

This standard applies to connecting devices with screw-type clamping units primarily suitable for connecting unprepared conductors. This Part 2-1 is intended to be used in…  [More Details+]

Connecting devices for low-voltage circuits for household and similar purposes - Part 2-1: Particular requirements for connecting devices as separate entities with screw-type clamping units / IEC 60998-2-1:2002 Edition 2.0

This standard applies to connecting devices with screw-type clamping units primarily suitable for connecting unprepared conductors. This Part 2-1 is intended to be used in…  [More Details+]

Connecting devices for low-voltage circuits for household and similar purposes - Part 2-1: Particular requirements for connecting devices as separate entities with screw-type clamping units / IEC 60998-2-1 Ed.2.0 (2002)

This standard applies to connecting devices with screw-type clamping units primarily suitable for connecting unprepared conductors. This Part 2-1 is intended to be used in…  [More Details+]

Connecting devices for low-voltage circuits for household and similar purposes - Part 2-2: Particular requirements for connecting devices as separate entities with screwless-type clamping units / IEC 60998-2-2:2002 Edition 2.0

This standard applies to connecting devices with screwless-type clamping units primarily suitable for connecting unprepared conductors. This Part 2-1 is intended to be used in…  [More Details+]

Connecting devices for low-voltage circuits for household and similar purposes - Part 2-2: Particular requirements for connecting devices as separate entities with screwless-type clamping units / IEC 60998-2-2 Ed.2.0 (2002)

This standard applies to connecting devices with screwless-type clamping units primarily suitable for connecting unprepared conductors. This Part 2-1 is intended to be used in…  [More Details+]

Connecting devices for low-voltage circuits for household and similar purposes - Part 2-3: Particular requirements for connecting devices as separate entities with insulation-piercing clamping units / IEC 60998-2-3:2002 Edition 2.0

This standard applies to connecting devices with insulation piercing clamping units primarily suitable for connecting insulated unprepared conductors. In the connecting operation the insulation of…  [More Details+]

Connecting devices for low-voltage circuits for household and similar purposes - Part 2-3: Particular requirements for connecting devices as separate entities with insulation-piercing clamping units / IEC 60998-2-3 Ed.2.0 (2002)

This standard applies to connecting devices with insulation piercing clamping units primarily suitable for connecting insulated unprepared conductors. In the connecting operation the insulation of…  [More Details+]

Connecting devices for low-voltage circuits for household and similar purposes - Part 2-4: Particular requirements for twist-on connecting devices / IEC 60998-2-4 Ed.2.0 (2002)

This International Standard applies to twist-on connecting devices for connecting two or more unprepared rigid and/or flexible copper conductors having a cross-sectional area of 0,5…  [More Details+]

Edison Screw lamp holders / IEC 60238 Ed.8.0 (2004)

This International Standard applies to lampholders with Edison thread E14, E27 and E40, designed for connection to the supply of lamps and semi-luminaires* only. It…  [More Details+]

Low-voltage fuses - Part 1: General requirements / IEC 60269-1 Ed.4.0 (2006)

This part of IEC 60269 is applicable to fuses incorporating enclosed current-limiting fuse-links with rated breaking capacities of not less than 6 kA, intended for…  [More Details+]

Low-voltage fuses - Part 1: General requirements / IEC 60269-1:2009 Con Ed. 4.1 (incl Amd 1)

IEC 60269-1:2006+A1:2009 is applicable to fuses incorporating enclosed current-limiting fuse-links with rated breaking capacities of not less than 6 kA, intended for protecting power-frequency a.c.…  [More Details+]

Low-voltage fuses - Part 3: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications) - Examples of standardized systems of fuses A to F / IEC 60269-3:2010 Ed 4.0

IEC 60269-3:2010 provides supplementary requirements for fuses for use by unskilled persons according to the following fuse systems comply with all subclauses of IEC 60269-1…  [More Details+]

Plugs and socket-outlets for household and similar purposes - Part 1: General requirements / IEC 60884-1 ed 3 (2002-06)

Applies to plugs and fixed or portable socket-outlets for a.c. only, with and without earthing contact, with a rated voltage above 50 V but not…  [More Details+]

Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBO's) - Part 2-1: Applicability of the general rules to RCBO's functionally independent of line voltage / IEC 61009-2-1:1991 Edition 1.0

[More Details+]

Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBO's) - Part 2-1: Applicability of the general rules to RCBO's functionally independent of line voltage / IEC 61009-2-1 Ed.1.0 (1991)

This International Standard applies to residual current operated circuit-breakers with integral overcurrent protection (RCBO's) functionally independent of line voltage, for household and similar uses incorporating…  [More Details+]

Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBO's) - Part 2-2: Applicability of the general rules to RCBO's functionally dependent on line voltage / IEC 61009-2-2 Ed.1.0 (1991)

This International Standard applies to residual current operated circuit-breakers with integral overcurrent protection (RCBO's) functionally dependent on line voltage, for household and similar uses incorporating…  [More Details+]

Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBO's) - Part 2-2: Applicability of the general rules to RCBO's functionally dependent online voltage / IEC 61009-2-2:1991 Edition 1.0

[More Details+]

Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCB's). Part 2-1: Applicability of the general rules to RCCB's functionally independent of line voltage / IEC 61008-2-1:1990 Edition 1.0

[More Details+]

Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCB's). Part 2-1: Applicability of the general rules to RCCB's functionally independent of line voltage / IEC 61008.2.1 (1990)

This Part 2-1 supplements or modifies the corresponding clauses in IEC 1008-1 to cover its applicability to RCCB's functionally independent of line voltage. This clause…  [More Details+]

Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) - Part 1: General rules / IEC 61008-1 : 2012 Con ed 3.1 (incld Am 1)

IEC 61008-1:2010+A1:2012 applies to residual current operated circuit-breakers functionally independent of, or functionally dependent on, line voltage, for household and similar uses, not incorporating overcurrent…  [More Details+]

Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-1: Methods of measurement of disturbances and immunity - Conducted disturbance measurements / CISPR 16-2-1 : 2010 Con Ed 2.1, 2010 (Incl Amd 1)

CISPR 16-2-1:2008+A1:2010 specifies the methods of measurement of disturbance phenomena in general in the frequency range 9 kHz to 18 GHz and especially of conducted…  [More Details+]

Switches for household and similar fixed electrical installations - Part 2-1: Particular requirements - Electronic switches / IEC 60669-2-1 Ed.4.0 (2002)

Applies to electronic switches and to associated electronic extension units for household and similar fixed electrical installations either indoors or outdoors. The contents of the…  [More Details+]

Switches for household and similar fixed electrical installations - Part 2-3: Particular requirements - Time-delay switches (TDS) / IEC 60669-2-3:2006 Edition 3.0

This part of IEC 60669 applies to time-delay switches (hereinafter referred to as TDS) with a rated voltage not exceeding 440 V and a rated…  [More Details+]

 < 1 2