Search Harmonised Standards in ASEAN: HS

Conducting and dissipative rubbers, vulcanized or thermoplastic -- Measurement of resistivity / ISO 1853:2011

ISO 1853:2011 specifies the requirements for the laboratory testing of the volume resistivity of specially prepared test pieces of vulcanized or thermoplastic rubber compounds rendered…  [More Details+]

Medical devices -- Application of risk management to medical devices / ISO 14971:2007

ISO 14971:2007 specifies a process for a manufacturer to identify the hazards associated with medical devices, including in vitro diagnostic (IVD) medical devices, to estimate…  [More Details+]

Medical devices -- Quality management systems -- Guidance on the application of ISO 13485: 2003 / ISO/TR 14969:2004

ISO/TR 14969:2004 provides guidance for the application of the requirements for quality management systems contained in ISO 13485. It does not add to, or otherwise…  [More Details+]

Medical devices -- Quality management systems -- Requirements for regulatory purposes / ISO 13485:2003

ISO 13485:2003 specifies requirements for a quality management system where an organization needs to demonstrate its ability to provide medical devices and related services that…  [More Details+]

Packaging for terminally sterilized medical devices -- Part 2: Validation requirements for forming, sealing and assembly processes / ISO 11607-2:2006

ISO 11607-2:2006 specifies the requirements for development and validation of processes for packaging medical devices that are terminally sterilized. These processes include forming, sealing, and…  [More Details+]

Rubber -- Determination of ash / ISO 247:2006

ISO 247:2006 specifies two methods for the determination of ash from raw rubbers, compounded rubbers and vulcanizates. The methods are applicable to raw, compounded or…  [More Details+]

Rubber -- Determination of metal content by atomic absorption spectrometry -- Part 4: Determination of manganese content / ISO 6101-4:2014

ISO 6101-4:2014 specifies an atomic absorption spectrometric method for the determination of the manganese content of rubbers. The method is applicable to raw rubber and…  [More Details+]

Rubber -- Guide to the calibration of test equipment / ISO 18899: 2013

ISO 18899:2013 outlines the principles of calibration of rubber test equipment and gives guidance on the general requirements for ensuring measurement traceability, establishing the basis…  [More Details+]

Rubber -- Guide to the use of curemeters / ISO 6502:1999

This International Standard provides guidance on the determination of vulcanization characteristics of rubber compounds by means of curemeters.  [More Details+]

Rubber test mixes -- Preparation, mixing and vulcanization -- Equipment and procedures / ISO 2393:2014

ISO 2393:2014 specifies the equipment and procedures for the preparation, mixing, and vulcanization of rubber test mixes specified in the various International Standards for the…  [More Details+]

Rubber — Determination of metal content by atomic absorption spectrometry — Part 3: Determination of copper content / ISO 6101-3:2014

ISO 6101-3:2014 specifies an atomic absorption spectrometric method for the determination of the copper content of rubbers. The method is applicable to raw rubber and…  [More Details+]

Rubber, vulcanized or thermoplastic -- Accelerated ageing and heat resistance tests / ISO 188:2011

ISO 188:2011 specifies accelerated ageing or heat resistance tests on vulcanized or thermoplastic rubbers. Two methods are given: Method A: air-oven method using a cell-type…  [More Details+]

Rubber, vulcanized or thermoplastic -- Antistatic and conductive products -- Determination of electrical resistance / ISO 2878: 2011

ISO 2878:2011 specifies a method of test to determine the electrical resistance of antistatic and conductive products manufactured wholly or in part from rubber whose…  [More Details+]

Rubber, vulcanized or thermoplastic -- Determination of adhesion to textile fabrics / ISO 36:2011

ISO 36:2011 specifies a method of test for measuring the force required to separate, by stripping, two plies of fabric bonded with rubber, or a…  [More Details+]

Rubber, vulcanized or thermoplastic -- Determination of hardness (hardness between 10 IRHD and 100 IRHD) / ISO 48:2010

ISO 48:2010 specifies four methods for the determination of the hardness of vulcanized or thermoplastic rubbers on flat surfaces (standard-hardness methods) and four methods for…  [More Details+]

Rubber, vulcanized or thermoplastic -- Determination of shear modulus and adhesion to rigid plates -- Quadruple-shear methods / ISO 1827:2011

ISO 1827:2011 specifies methods for the determination of the modulus in shear and the strength of bonds of rubber to metal or other rigid plates,…  [More Details+]

Rubber, vulcanized or thermoplastic -- Determination of tensile stress-strain properties / ISO 37:2011

ISO 37:2011 describes a method for the determination of the tensile stress-strain properties of vulcanized and thermoplastic rubbers. The properties which can be determined are…  [More Details+]

Rubber, vulcanized or thermoplastic -- Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load / ISO 2285: 2013

ISO 2285:2013 specifies a number of methods of determining the dimensional changes in test pieces of vulcanized or thermoplastic rubber during and after tensile loading…  [More Details+]

Rubber, vulcanized or thermoplastic -- Determination of the effect of liquids / ISO 1817:2015

ISO 1817:2015 describes methods of evaluating the resistance of vulcanized and thermoplastic rubbers to the action of liquids by measurement of properties of the rubbers…  [More Details+]

Rubber, vulcanized or thermoplastic -- Resistance to ozone cracking -- Part 1: Static and dynamic strain testing / ISO 1431-1:2012

ISO 1431-1:2012 specifies procedures intended for use in estimating the resistance of vulcanized or thermoplastic rubbers to cracking when exposed, under static or dynamic tensile…  [More Details+]

Single-use medical examination gloves -- Part 1: Specification for gloves made from rubber latex or rubber solution / ISO 11193-1 : 2008 Ed 2

ISO 11193-1:2008 specifies requirements for packaged sterile, or bulked non-sterile, rubber gloves intended for use in medical examinations and diagnostic or therapeutic procedures to protect…  [More Details+]

Sterilization of health care products -- Radiation -- Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices / ISO 11137-1:2006

ISO 11137-1:2006 specifies requirements for the development, validation and routine control of a radiation sterilization process for medical devices. Although the scope of ISO 11137-1:2006…  [More Details+]