Search Harmonised Standards in ASEAN: MRA

Appliance couplers for household and similar general purposes - Part 2-1: Sewing machine couplers / IEC 60320-2-1 Ed.2.0 (2000)

This part of IEC 60320 is applicable to special purpose appliance couplers for household sewing machines. These sewing machine couplers are for a.c. only and…  [More Details+]

Appliance couplers for household and similar general purposes - Part 2-2: Interconnection couplers for household and similar equipment / IEC 60320-2-2 Ed.2.0 (1998)

Applicable to two-pole interconnection couplers for a.c. only, with and without earthing contact, with a rated voltage not exceeding 250 V and a rated current…  [More Details+]

Appliance couplers for household and similar general purposes - Part 2-3: Appliance couplers with a degree of protection higher than IPX0 / IEC 60320-2-3 Ed.1.1(2005)

Applies to two-pole non-reversible appliance couplers for cold conditions for a.c. only, with a degree of protection against ingress of water higher than IPX0, with…  [More Details+]

Appliance couplers for household and similar general purposes - Part 2-4: Couplers dependent on appliance weight for engagement / IEC 60320-2-4 Ed.1.0 (2005)

This standard is applicable to two-pole appliance couplers for a.c. only, with or without earthing contact, with a rated voltage not exceeding 250 V and…  [More Details+]

Auxiliaries for lamps - Capacitors for use in tubular fluorescent and other discharge lamp circuits - General and safety requirements / IEC 61048:2006 Ed 2

This International Standard states the requirements for both self-healing and non-self-healing continuously rated a.c. capacitors of up to and including 2,5 kVAr, and not less…  [More Details+]

Capacitors for use in tubular fluorescent and other discharge lamp circuits. Performance requirements / IEC 61049 Ed.1.0 (1991)

Specifies the requirements for both self-healing and non-self- healing continuously rated a.c. capacitors of up to and including 2,5 kvar, and not less than 0,1…  [More Details+]

Circuit-breakers for overcurrent protection for household and similar installations - Part 2: Circuit-breakers for a.c. and d.c. Operation / IEC 60898-2 Ed.1.0 (2003)

This standard gives additional requirements for single- and two-pole circuit-breakers suitable for operation with direct current, having a rated d.c. voltage not exceeding 220 V…  [More Details+]

Conductors of insulated cables / IEC 60228:2004 Ed. 3.0

Specifies the nominal cross-sectional areas, in the range 0,5 mm2 to 2 500 mm2, for conductors in electric power cables and cords of a wide…  [More Details+]

Connecting devices for low-voltage circuits for household and similar purposes - Part 1: General requirements / IEC 60998-1 Ed.2.0 (2002)

This part of IEC 60998 applies to connecting devices as separate entities for the connection of two or more electrical copper conductors (complying with IEC…  [More Details+]

Connecting devices for low-voltage circuits for household and similar purposes - Part 2-1: Particular requirements for connecting devices as separate entities with screw-type clamping units / IEC 60998-2-1 Ed.2.0 (2002)

This standard applies to connecting devices with screw-type clamping units primarily suitable for connecting unprepared conductors. This Part 2-1 is intended to be used in…  [More Details+]

Connecting devices for low-voltage circuits for household and similar purposes - Part 2-2: Particular requirements for connecting devices as separate entities with screwless-type clamping units / IEC 60998-2-2 Ed.2.0 (2002)

This standard applies to connecting devices with screwless-type clamping units primarily suitable for connecting unprepared conductors. This Part 2-1 is intended to be used in…  [More Details+]

Connecting devices for low-voltage circuits for household and similar purposes - Part 2-3: Particular requirements for connecting devices as separate entities with insulation-piercing clamping units / IEC 60998-2-3 Ed.2.0 (2002)

This standard applies to connecting devices with insulation piercing clamping units primarily suitable for connecting insulated unprepared conductors. In the connecting operation the insulation of…  [More Details+]

Connecting devices for low-voltage circuits for household and similar purposes - Part 2-4: Particular requirements for twist-on connecting devices / IEC 60998-2-4 Ed.2.0 (2002)

This International Standard applies to twist-on connecting devices for connecting two or more unprepared rigid and/or flexible copper conductors having a cross-sectional area of 0,5…  [More Details+]

Determination of limits for industrial, scientific and medical equipment / CISPR 16-4-4 Ed2.0 (2007-06)

This Technical Report contains a recommendation on how to deal with statistics of radio interference complaints. Furthermore it describes the calculation of limits for disturbance…  [More Details+]

Double-capped fluorescent lamps - Performance specifications / IEC 60081 Ed. 5.1 (2002)

This international standard gives technical requirements for tubular fluorescent lamps with preheated cathodes for general lighting service, operated with or without a starter from a.c.…  [More Details+]

Edison Screw lamp holders / IEC 60238 Ed.8.0 (2004)

This International Standard applies to lampholders with Edison thread E14, E27 and E40, designed for connection to the supply of lamps and semi-luminaires* only. It…  [More Details+]

Glow-starters for fluorescent lamps / IEC 60155 Ed.4.0 (1993), am.1 (1995), am2 (2006)

Specifies interchangeable starters used with pre-heat type tubular fluorescent lamps and should be used in conjunction with corresponding publications for fluorescent lamps and their ballasts.  [More Details+]

Hand-held motor-operated electric tools - Safety - Part 2-11: Particular requirements for reciprocating saws (jig and sabre saws) / IEC 60745-2-11 Ed.2.0(2003)

Deals with the safety of hand-held motor-operated or magnetically driven tools, specific requirements for reciprocating saws. The rated voltage being not more than 250 V…  [More Details+]

Hand-held motor-operated electric tools - Safety - Part 2-14: Particular requirements for planers / IEC 60745-2-14 Ed.2.0 (2003)

Deals with the safety of tools which the rated voltage is not more than 250 V for single-phase a.c. or d.c. tools and 440 V…  [More Details+]

Hand-held motor-operated electric tools - Safety - Part 2-15: Particular requirements for hedge trimmers / IEC 60745-2-15 Ed.2.0 (2006)

Applies to hedge trimmers which are designed for use by one operator for trimming hedges and bushes, utilizing one or more linear reciprocating cutter blades.…  [More Details+]

Hand-held motor-operated electric tools - Safety - Part 2-1: Particular requirements for drills and impact drills / IEC 60745-2-1 Ed.2.0 (2003)

Deals with the safety of hand-held motor-operated or magnetically driven electric tools, specific requirements for drills and impact drills. The rated voltage being not more…  [More Details+]

Hand-held motor-operated electric tools - Safety - Part 2-3: Particular requirements for grinders, polishers and disk-type sanders / IEC 60745-2-3 Ed.2.0 (2006)

Applies to grinders, with a rated speed not exceeding a peripheral speed of the accessory of 80 m/s at rated capacity, polishers and disk-type sanders,…  [More Details+]

Hand-held motor-operated electric tools - Safety - Part 2-4: Particular requirements for sanders and polishers other than disk type / IEC 60745-2-4 Ed.2.0 (2002)

Applies to sanders with the exception of all types of disc-type sanders, which are covered by IEC 60745-2-3. Tools covered include but are not limited…  [More Details+]

Household and similar electrical appliances - Safety - Part 2-12: Particular requirements for warming plates / IEC 60335-2-12 Ed.5.0 (2002)

Deals with the safety of electric warming plates, warming trays and similar appliances intended to keep food or vessels warm, for household and similar purposes,…  [More Details+]

Household and similar electrical appliances - Safety - Part 2-21: Particular requirements for Electric Storage Water Heaters / IEC 60335-2-21 Ed.5.1(2004)

Deals with the safety of electric storage water heaters for household and similar purposes and intended for heating water below boiling temperature, their rated voltage…  [More Details+]

 1 2 3 >  Last ›