Title Of Document
Conducting and dissipative rubbers, vulcanized or thermoplastic -- Measurement of resistivity
Abstract
ISO 1853:2011 specifies the requirements for the laboratory testing of the volume resistivity of specially prepared test pieces of vulcanized or thermoplastic rubber compounds rendered conducting or dissipative by the inclusion of carbon black or ionizable materials. The tests are suitable for materials with a resistivity of less than about 108 ohm metres. Method 1 is the preferred method when test pieces with bonded electrodes are not available. Method 2 is the preferred method when test pieces are moulded with the inclusion of bonded electrodes. Method 3 may be used if methods 1 and 2 are not suitable, but it has lower accuracy.
Category of Standards
Category 2
Document number assigned by ASEAN
ISO 1853:2011
ICS
HS Range
MRA/Harmonised Regulations related to the Standard
No current MRA
ASEAN Body responsible for Standard
Rubber-Based Products Working Group (RBPWG)
Member States
ID
MY
PH
TH
Date of harmonisation in ASEAN
Date of Latest Review
Links :
ISO 1853:2011 Conducting and dissipative rubbers, vulcanized or thermoplastic -- Measurement of resistivity